GB
20
Setting the clock
1
Lower the lens cover.
The camera is turned on.
Date & Time setting is displayed when you turn on the camera for the first
time.
• You can also turn on the camera by pressing the ON/OFF (Power)
button.
• It may take time for the power to turn on and allow operation.
2
Select a desired language.
3
Select a desired geographic location by following the
on-screen instructions, then touch [Next].
4
Set [Daylight Savings] or [Summer Time], [Date & Time
Format] and [Date & Time], then touch [Next].
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
Touch [OK].
6
Follow the instructions on the screen.
• The battery pack will run out quickly when:
– [Disp. Resolution] is set to [High].
ON/OFF (Power) button
Lens cover
To Next Page
Loading...
