102
Viewing images
Deleting/Editing Images
Symptom Cause Solution
Your camera cannot play
back images.
• The mode dial is not set to .
• Your camera cannot play back image files
copied from the hard disk of your computer if the
folder/file name has been changed or the image
has been modified.
• The camera is in USB mode.
p Set it to (page 30).
—
p Cancel USB communication (page 90).
The image appears rough
right after playback starts.
— p This is not a malfunction.
The image does not
appear on the TV screen.
• The video output signal setting of your camera in
the SET UP settings is incorrect.
• The connection is not correct.
p Change the setting (pages 39 and 117).
p Check the connection (page 32).
The image cannot be
played back on a
computer.
— p See page 103.
Unknown beeps are heard
from the camera while
viewing a movie.
• These beeps are heard when the auto focus is
working.
p This is not a malfunction. Shoot the image using the focus preset
(page 48).
Symptom Cause Solution
Your camera cannot
delete an image.
• The image is protected.
• The write-protect switch on the “Memory Stick”
is set to the LOCK position.
p Cancel the protection (page 74).
p Set it to the recording position (page 119).
You have deleted an
image by mistake.
• Once you have deleted an image, you cannot
restore it.
p Marking
- (protect) will prevent you from deleting images by
mistake (page 74).
p We recommend that you set the “Memory Stick” write-protect
switch to the LOCK position to prevent accidental erasure
(page 119).
The resizing function
does not work.
• You cannot resize movies (MPEG Movie), Clip
Motion, Multi Burst and uncompressed (TIFF)
images.
—
To Next Page
Loading...
Need help?
General
