28
Shooting images with the finder
The finder is convenient when you want to
save battery power, or when it is difficult to
confirm the image using the LCD screen.
Each time you press , the display
changes in the following order.
Indicators on
r
Histogram on
r
Indicators off
r
LCD screen off
• The image through the finder does not indicate
the actual recordable range. To confirm the
recordable range, use the LCD screen.
• Just as with the AE/AF lock indicator on the
LCD screen, when the AE/AF lock lamp of the
finder section stops flashing and remains on,
you can start shooting (page 21).
• When the LCD screen is turned off:
– The smart zoom does not function (page 23).
– The AF Mode is set to [Single] (page 47).
– If you press (Flash mode)/ (Self-timer)/
(Macro), the image will be displayed on
the LCD screen for approximately two
seconds so you can check or change the
setting.
• For a detailed description of the indicators, see
page 124.
• For a detailed description of the histogram, see
page 50.
• This setting is maintained even when the power
is turned off.
Finder
VGA
101
96
S AF
60
min
VGA
101
96
S AF
60min
S AF
To Next Page
Loading...
Need help?
General
