54
a Set the mode dial to SET UP.
The SET UP screen appears.
b Select (Camera 2) with v/V
and [Bracket Step] with B/v,
then press B.
c Select the desired bracket step
value with v/V, then press z.
±1.0EV: Shifts the exposure value by
plus or minus 1.0EV.
±0.7EV: Shifts the exposure value by
plus or minus 0.7EV.
±0.3EV: Shifts the exposure value by
plus or minus 0.3EV.
d Set the mode dial to , P, S,
A, M or SCN.
e Press MENU.
The menu appears.
f Select [Mode] (REC Mode) with
b/B, then select [Exp Brktg]
with v/V.
g Shoot the image.
To return to normal mode
Select [Normal] in step 6.
• You cannot use the flash in this mode.
• During shooting in this mode, the images are
not displayed on the screen. Compose the
image before pressing the shutter button.
• The focus and white balance are adjusted for
the first image, and these settings are also used
for the other images.
• When the exposure is manually adjusted
(page 49), the adjusted value is used for the
center value.
• The recording interval is approximately
0.5 second.
• If the subject is too bright or too dark, you may
be unable to shoot properly with the selected
bracket step value.
• You cannot select certain shutter speeds*.
* When [ISO] is [800]:
Shutter speeds of 1/25 second or slower
When [ISO] is other than [800]:
Shutter speeds of 1/6 second or slower
2
To Next Page
Loading...
Need help?
General
