Sony DSC-V1 Operating Instructions (English)

Still image editing
75
g Press MENU.
h Select [OK] with B, then press
z.
The - indicator turns white. The
selected images are protected.
To exit the Protect function
Select [Cancel] in step 4 or select [Exit] in
step 8, then press z.
To cancel individual protection
Select the image to be unprotected with
v/V/b/B, then press z in step 5. The -
indicator turns gray. Repeat this operation
for all images that are to be unprotected.
Press MENU, select [OK], and then press
z.
To protect all images in the
folder
Select [All In Folder] in step 4, and press
z. Select [On], then press z.
To cancel all protection of all
images in the folder
Select [All In Folder] in step 4, and press
z. Select [Off], then press z.
In index (triple-image) mode
a Set the mode dial to , then
press
/ (index) twice to
display the index (triple-image)
screen.
b Display the image you want to
protect in the center position
with
b/B.
c Press MENU.
The menu appears.
d Select [Protect] with v/V, then
press
z.
The center image is protected. The -
indicator appears on the image.
e To protect other images,
display the image you want to
protect in the center position
with
b/B, and repeat step 4.
To cancel previously set
protection
Select the image to be unprotected, and
press z in step 4. To cancel protection of
all images, repeat this process for each
image.
10:30PM2003 7 4101-0002
Protect
DPOF
Folder
BACK/NEXTOK