Sony DSC-V1 Operating Instructions (English) User Manual

86
Installing the USB driver
When using Windows XP, you need not
install the USB driver.
Once the USB driver is installed, you need
not install the USB driver again.
a Start up your computer, and
insert the supplied CD-ROM
into the CD-ROM drive.
The model selection screen appears. If
it does not appear, double-click
(My Computer) t (ImageMixer)
in that order.
b Click [Cyber-shot] on the
model selection screen.
The installing menu screen appears.
c Click [USB Driver] on the
installing menu screen.
The “InstallShield Wizard” screen
appears.
d Click [Next]. When the
“Information” screen appears,
click [Next].
The USB driver installation starts.
When the installation is completed, the
screen informs you of completion.
e Click [Yes, I want to restart my
computer now], then click
[Finish].
Your computer restarts. Then, you can
establish USB connection.
Do not connect your camera to
your computer at this time.

Sony DSC-V1 Operating Instructions (English) Specifications

General

Model	DSC-V1
Category	Digital Camera
Effective Pixels	5.0 Megapixels
Sensor Type	CCD
Sensor Size	1/1.8 inch
Lens	Carl Zeiss Vario-Sonnar
Optical Zoom	4x
Digital Zoom	4x
Shutter Speed	30 - 1/1000 sec
LCD Screen Size	1.5 inch
Storage Media	Memory Stick, Memory Stick Pro
Battery Type	NP-FC11 Lithium-ion
ISO Sensitivity	100, 200, 400