When you use [Digital Zoom] or [AF Illuminator], the AF range finder frame is disabled and appears in a dotted line. In
this case, the camera works to focus on the subjects at the center of the screen.
If tracking focus is activated, the camera focuses with priority on the subject to be tracked.
Focusing on subjects near the edge of the screen
If the subject is out of focus, do as follows:
1. Recompose the shot so that the subject is centered in the AF range finder (A), and press the shutter button halfway
to focus on the subject (AF lock).
2. When the AE/AF lock indicator (B) stops flashing and remains on, return to the fully composed shot, and press the
shutter button fully down.
Notes on use
4-488-056-11(1)
Copyright 2014 Sony Corporation
To Next Page
Loading...
