Digital Still Camera
DSC-W830
Connecting the camera to the computer
1. Insert the fully charged battery in the camera.
2. Power on the camera and the computer.
3. Connect the camera to your computer using the dedicated USB cable (supplied) (A).
Note
When connecting the camera to a computer using the dedicated USB cable, power feeding from the computer starts if
[USB Power Supply] is set to [On]. ([On] is the default setting.)
Related Topic
USB Connect Setting
LUN Setting
Notes on use
4-488-056-11(1)
Copyright 2014 Sony Corporation
Help Guide
How to use
To Next Page
Loading...
