18GB
NO AF: No alternative frequencies.
Press SEEK +/– while the program service name is
flashing. The unit starts searching for another
frequency with the same PI (program
identification) data ([PI SEEK] appears).
NO DATA
There is no program type for the current DAB
service.
P
ress (back).
NO INFO (no information)
There is no label information for the current DAB
service.
NO SERV (no service)
The DAB signal cannot be received.
P
erform an auto scan (page 8).
C
heck the connection of the DAB antenna
(aerial).
Ch
eck that [ANT-PWR] is set to [ON] (page 12).
NO TP: No traffic programs.
The unit will continue searching for available TP
stations.
OVERLOAD: The USB device is overloaded.
Disconnect the USB device, then press SRC to
select another source.
T
he USB device has a fault, or an unsupported
device is connected.
READ: Now reading information.
Wait until reading is complete and playback
starts automatically. This may take some time
depending on the file organization.
RECEIVING
The DAB band is selected and the unit is waiting
to receive a service.
USB ERROR: The USB device cannot be played.
Connect the USB device again.
USB NO DEV: A USB device is not connected or
recognized.
Make sure the USB device or USB cable is securely
connected.
USB NO MUSIC: There is no playable file.
Connect a USB device containing playable files
(page 15).
USB NO SUPRT: The USB device is not supported.
For details on the compatibility of your USB
device, visit the support site on the back cover.
If these solutions do not help improve the situation,
c
onsult your nearest Sony dealer.
To Next Page
Loading...
