8GB
4 After setting the minute, press
SELECT.
The setup is complete and the clock
starts.
To display the clock, press DSPL.
Preparing a BLUETOOTH
Device
You can enjoy music, or perform handsfree
calling, by connecting a suitable BLUETOOTH
device. For details on connecting, refer to the
operating instructions supplied with the
device.
Before connecting the device, turn down the
volume of this unit; otherwise, loud sound
may result.
When connecting a BLUETOOTH device
(cellular phone, audio device, etc.) for the
first time, mutual registration (called
“pairing”) is required. Pairing enables this
unit and other devices to recognize each
other.
1 Place the BLUETOOTH device within
1 m (3 ft) of this unit.
2 Press CALL, rotate the control dial to
select [PAIRING], then press it.
flashes.
The unit enters pairing standby mode.
3 Perform pairing on the BLUETOOTH
device so it detects this unit.
4 Select [Sony Automotive] shown in
the display of the BLUETOOTH
device.
If [Sony Automotive] does not appear,
repeat from step 2.
5 If passkey* input is required on the
BLUETOOTH device, input [0000].
* Passkey may be called “passcode,” “PIN
code,” “PIN number” or “Password,” etc.,
depending on the device.
When pairing is made, stays lit.
6 Select this unit on the BLUETOOTH
device to establish the BLUETOOTH
connection.
or lights up when the connection is
made.
Pairing and connecting with a
BLUETOOTH device
To Next Page
Loading...
Need help?
General
Weight and Dimensions
