Sony DVP-S725D - Disassembly; Case Removal; MB-82;85 Board Removal; Power Block Removal

2-1
Note: Follow the disassembly procedure in the numerical order given.
SECTION 2
DISASSEMBLY
DVP-S325/S525D/S725D
2-1. CASE REMOVAL
2-2. MB-82/85 BOARD REMOVAL
2-3. POWER BLOCK REMOVAL
2-4. ER-4/5 BOARD REMOVAL
(EXCEPT Australian)
4 Case
3 Two screws
2 Two screws
1 Three screws
4 Two flat cables
(CN004, 007)
(S525D/S725D)
2 Two flat cables
(CN002, 003)
6 Flat cable
(CN006)
8 MB-82 board
(Australian)
MB-85 board
(EXCEPT Australian)
7 Four screws
(B3)
3 Connector
(CN001)
1 Connector
(CN011)
5 Flat cable
(CN005)
2 Connector
(CN101)
3 Three connectors
(CN201, 202, 203)
1 Connector
(CN102)
(S725D)
4 Four screws
(B3)
5 Power block
2 Four screws
(B3)
1 Two flat cables
(CN901, 902)
3 ER-4 board (S325/S525D)
ER-5 board (S725D)