Sony DVP-S725D - AU-209;212 Board Removal (S325;S525 D); AU-210;211 Board Removal (S725 D); Tray Cover Removal; Front Panel Removal

2-2
2-7. TRAY COVER REMOVAL
2-8. FRONT PANEL REMOVAL
2-5. AU-209/212 BOARD REMOVAL
(S325/S525D)
2-6. AU-210/211 BOARD REMOVAL
(S725D)
9 Three screws
(B3)
8 Two screws
(B3)
(S525D)
6 Screws
(B3)
(S525D: Australian)
7 Five screws
(B3)
2 Connector
(CN401)
1 Connector
(CN201)
5 Flat cable
(CN301)
3 Flat cable
(CN303)
(S525D: Australian)
4 Flat cable
(CN302)
!º AU-209 board
(S325/S525D: EXCEPT Australiran)
AU-212 board
(S525D: Australian)
6 Three screws
(B3)
2 Connector
(CN401)
3 Two connectors
(CN301, 404)
4 Three flat cables
(CN402, 403, 405)
7 AU-210 board
(Australian)
AU-211 board
(EXCEPT Australian)
5 Nine screws
(B3)
1 Connector
(CN407)
4 Tray cover
2 Pull the tray in the
direction of the
arrow B.
1 Insert a tapering driver into the aperture of the
unit bottom, and move the lever of chuck cam
in the direction of the arrow A.
3 Two claws
B
A
4 Screw
(B3)
(S525D/S725D)
2 Connector
(CN701)
(S525D/S725D)
3 Flat cable
(CN006)
1 Connector
(CN203)
5 Two screws
(B3)
9 Claw
8 Claw
!º Front panel
6 Boss
7 Boss