Sony ECM-TL3 Specification Sheet

Specications
©2011 Sony Electronics Inc.
Sony is a trademark of Sony. All other trademarks are property of their respective owners.
Features and specications are subject to change without notice. Non-metric weights and
measures are approximate. /Updated: January 31, 2012
General
Cupsule
Innner Ear System
Directivity
Omni-directional
Frequency Response
20 - 20,000Hz
Plug
Gold-plated,Three-Conductor, L-shaped mini-plug
Sensitivity
Open Circuit Output Voltage Level: -35 dB (1,000 Hz, 0 db = 1 V/Pa)
Type of Use
Electret Condenser Microphone
Hardware
Cord
Approximately 1.5 m (59 1/8 in)
Operating Conditions
Operating Temperature
5° C - 35° C (41° F - 95° F)
Power
Power Management
Plug-in Power System
Weights and Measurements
Weight (Approx.)
Approximately 8 g (0.28 oz) (with Cord)
Accessories
Supplied Accessories
Earbuds: (S x 1, M x 1, L x 1)
Optional Accessories
PC-236MS stereo-monaural
converter plug: If the microphone is
connected to a monaural
recorder, the microphone
may not be able to work to
its full capability, depending
on the recorder. In such a
case, use the PC-236MS
stereo-monaural converter
plug.
EP-EX10A earbud
ECM-TL3

Sony ECM-TL3 Specifications

General

Microphone frequency	20 - 20000 Hz
Microphone sensitivity	-35 dB
Microphone direction type	Omnidirectional
Connectivity technology	Wired
Cable length	1.5 m
Weight	8 g