Sony EVI-D70 - Mode Conditions and Basic Settings

27
Basic Functions
Mode Condition
Basic settings
Mode Power Off Initializing
1)
IFC
2)
Power On Freeze On Memory Recall
Address Set aaaaa a
IF_Clear aaaaa a
Power On a ××aa a
Power Off a ××aa a
AutoPowerOff setting ×××aa a
NightPowerOff setting ×××aa a
IR_Receive On/Off ×××aa a
IR_ReceiveReturn_On/Off ×××aa a
CAM_DeviceTypeInq/VersionInq/IDInq aaaaa a
CAM_PowerInq aaaaa a
BlockInquiry aaaaa a
InquiryCommand (and similar commands) × a aaa a
ID Write ×××aa a
1.) Initializing: The period from the time DC power is turned on until the video signal is output. Or, the period from the time
the CAM_PowerOn
command is sent until Completion is returned.
2.) IFC: The period from the time IF_Clear is sent until the Reply Packet is returned.