26
Command List
FCB-H11 Command List (3/3)
Command Set Command Command Packet Comments
CAM_PictureEffect Off 8x 01 04 63 00 FF Picture Effect Setting
Neg.Art 8x 01 04 63 02 FF
B&W 8x 01 04 63 04 FF
CAM_ICR On 8x 01 04 01 02 FF Infrared Mode On/Off
Off 8x 01 04 01 03 FF
CAM_AutoICR On 8x 01 04 51 02 FF Auto dark-field mode On/Off
Off 8x 01 04 51 03 FF
Threshold 8x 01 04 21 00 00 0p 0q FF pq: ICR ON t OFF Threshold Level
CAM_Memory Reset 8x 01 04 3F 00 0p FF p: Memory Number (=0 to 5)
Set 8x 01 04 3F 01 0p FF
Recall 8x 01 04 3F 02 0p FF
CAM_CUSTOM Reset 8x 01 04 3F 00 7F FF
Set 8x 01 04 3F 01 7F FF
Recall 8x 01 04 3F 02 7F FF
CAM_Mute On 8x 01 04 75 02 FF Mute On/Off
Off 8x 01 04 75 03 FF
On/Off 8x 01 04 75 10 FF
CAM_KeyLock Off 8x 01 04 17 00 FF Key operation enable/disable
On 8x 01 04 17 02 FF
CAM_IDWrite 8x 01 04 22 0p 0q 0r 0s FF pqrs: Camera ID (=0000 to FFFF)
CAM_RegisterValue 8x 01 04 24 mm 0p 0q FF mm: Register number (00 to 7F)
pp: Register Value (00 to FF)
1)After an ACK to a One Push White Balance Trigger is sent until the operation is completed, “Not Executable” is sent as a reply when any
other commands are received.
When a slow shutter speed (1/30, 1/25 or lower) is selected, the time needed for the One Push White Balance adjustment will be longer.
To Next Page
Loading...
