Need help?Do you have a question about the Sony FCB-H11 and is the answer not in the manual?
General| Signal System | NTSC/PAL |
|---|---|
| Image Sensor | 1/3 type |
| Digital Zoom | 12x |
| Shutter Speed | 1/1 to 1/10, 000 sec |
| Video Output | Composite (1.0 Vp-p, 75 Ω) |
| Focus System | Auto/Manual |
| White Balance | Auto/Manual |
| Gain | Auto/Manual |
| Power Supply | 12 V DC |
| Operating Temperature | -5°C to +50°C |
| Storage Temperature | -20 °C to +60 °C |
Explains VISCA commands as the basis for camera control.
Details the camera's 10x optical and up to 120x digital zoom capabilities.
Describes various focus modes like Auto, Manual, One Push, and Infinity.
Covers Auto, Indoor, Outdoor, One Push, and Manual White Balance modes.
Details AE modes like Full Auto, Slow shutter, Shutter Priority, and Iris Priority.
Introduces VISCA as a protocol for consumer camcorder control.
Details commands for operational control and state inquiries.
Explains standard messages confirming command acceptance and execution.
Lists messages indicating command errors like syntax or buffer issues.
Lists commands for Address Set, Power, Zoom, DZoom, Focus, AF Mode, WB, RGain, BGain.
Continues command list for AE, Shutter, Iris, Gain, Bright, ExpComp, BackLight, SpotAE, Aperture, Gamma, Freeze.
Completes command list for PictureEffect, ICR, AutoICR, Memory, Custom, Mute, KeyLock, IDWrite, RegisterValue.
Lists inquiry commands for Power, Zoom, DZoom, Focus, AF, WB, Gain, AE, Shutter, Iris, etc.
Provides setting values for Shutter Speed and Iris.
Lists setting values for Bright, Gain, Exposure Comp., and Zoom/Focus positions.
To Next Page
