Sony FWD-50PX2 User Manual (English)

Other manuals for Sony FWD-50PX2

Operating Instructions50 pages

Specifications2 pages

Questions and Answers:

P
Paige SimmonsAug 18, 2025
How to fix no picture on my Sony Flat Panel TV but the power light is on?
- C
  charlesrandolphAug 18, 2025
  If your Sony Flat Panel TV has no picture but the power indicator is lit, it could be due to a few reasons. First, a different input might be selected. Try pressing one of the input selection buttons (INPUT1, INPUT2, OPTION1, or OPTION2) on the remote control, or switch between the input signals by pressing the INPUT button on the top of the display. Second, a protective shutdown may have activated due to internal heat buildup. In this case, the power indicator flashes red four times in a row. Turn off the power, ensure the air vents are not blocked, there's ample space for airflow, and the room ventilation is working. The display should operate properly again when the internal temperature returns to normal.
J
Jesus HuangAug 25, 2025
Why does my Sony FWD-50PX2 Flat Panel TV turn off after a short time?
- M
  Mrs. Dawn HammondAug 26, 2025
  If your Sony Flat Panel TV's display power or screen turns off after a short time, the “Auto Shut Off” function may be set to “On”; to make the display power stay on indefinitely, set this function to “Off”. Alternatively, the “On/Off Timer” function may have been set; check the On/Off Timer setting in the TIMER/CLOCK menu. Finally, a protective shutdown may have activated due to internal heat buildup; in this case, the power indicator flashes red four times in a row. Turn off the power, ensure the air vents are not blocked, there's ample space for airflow, and the room ventilation is working. The display should operate properly again when the internal temperature returns to normal.
L
Lawrence RobinsonAug 28, 2025
How to prevent Sony FWD-50PX2 screen from going dark?
- S
  Shelly JonesAug 28, 2025
  If your Sony Flat Panel TV screen goes dark after a short time, the “Auto Dimmer” screen saver might be set to “On”. To prevent this, set the screen saver to “Off”.
A
Alexandria LopezAug 31, 2025
Why are there horizontal lines on my Sony FWD-50PX2?
- A
  Andrea SchneiderAug 31, 2025
  Horizontal lines of static disturbing the picture on your Sony Flat Panel TV can be caused by the internal temperature of the display getting too high. Turn off the power, and make sure that the air vents are not blocked, that there is ample space for air to flow around the display, and that the ventilation in the room is working properly. When the internal temperature returns to normal, the picture will display properly again.
C
Carlos ParkerSep 4, 2025
Why does the picture jump on my Sony FWD-50PX2 Flat Panel TV?
- A
  Aaron RiveraSep 4, 2025
  If the picture on your Sony Flat Panel TV occasionally jumps to a different position, the “Pic. Orbit” screen saver might be set to “On”. To prevent the picture from moving, set the screen saver to “Off”.
M
Mr. Patrick Faulkner MDSep 7, 2025
Why don't the buttons on my Sony FWD-50PX2 work?
- E
  eweaverSep 7, 2025
  If the power button and control buttons on your Sony Flat Panel TV do not work, the “Control Mode” in the remote control settings might be set to “Remote Only”. Check the setting by opening the main menu with the remote control and then selecting “CUSTOM SETUP” then “Remote” then “Control Mode”.
A
Angelica HarringtonSep 12, 2025
How to toggle between RGB and YUV on Sony Flat Panel TV?
- J
  Joseph TownsendSep 12, 2025
  If neither the remote control nor a Control S connection can be used to toggle between RGB and YUV (component), or between VIDEO (component video) and S-VIDEO (Y/C) on your Sony Flat Panel TV, the “Input Setting” for the selected input might be set to “Fix”. If you want the input signal to toggle with each press of the button, set the “Input Setting” to “Selectable”.

Sony FWD-50PX2 Specifications

General

Screen Size	50 inches
Display Type	Plasma
Aspect Ratio	16:9
Contrast Ratio	10000:1
Speakers	2 x 10W
Weight	42 kg
Resolution	1366 x 768
Viewing Angle	160°
Inputs	Component, Composite, S-Video