To Find the MAC Address for Your Device
1
From the Home screen, tap .
2
Find and tap Settings > Wi-Fi.
3
Tap . The MAC address is displayed in the list.
WPS
WPS (Wi-Fi Protected Setup™) is a wireless networking standard that helps you to
establish secure wireless network connections. WPS makes it easy for you to set up Wi-
Fi Protected Access® (WPA) encryption to secure your network. You can also add new
devices to an existing network without entering long passwords.
Use one of these methods to enable WPS:
•
Push button method – simply push a button on a WPS-supported device, for example, a
router.
•
PIN method – your device creates a random PIN (Personal Identification Number), which
you enter on the WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS Button
1
From the Home screen, tap
.
2
Find and tap Settings > Wi-Fi.
3
Turn on Wi-Fi if it is not already on.
4
Tap , then tap
Advanced
>
WPS Push Button
, then press the WPS button on the
WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS PIN
1
From your Home screen, tap .
2
Find and tap
Settings
>
Wi-Fi
.
3
Turn on Wi-Fi if it is not already on.
4
Tap
>
Advanced
>
WPS PIN Entry
.
5
On the WPS-supported device, enter the PIN that appears on your device.
Sharing Your Cellular Data Connection
You can share your cellular data connection with other devices in several ways:
•
USB tethering
– share your cellular data connection with a single computer using a USB Type-C™
cable.
•
Bluetooth® tethering
– share your cellular data connection with up to four other devices via Bluetooth®.
•
Portable hotspot
– share your cellular data connection simultaneously with up to 10 other devices via Wi-
Fi, including devices that support WPS technology.
To Share Your Data Connection Using a USB Cable
1
Connect your device to a computer, using the USB cable that came with it.
2
From your Home screen, tap .
3
Find and tap Settings > More > Tethering & portable hotspot.
4
Tap the USB tethering slider, then tap OK if prompted. is displayed in the
status bar once you are connected.
5
To stop sharing your data connection, tap the USB tethering slider or disconnect
the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
49
This is an internet version of this publication. © Print only for private use.
To Next Page
Loading...
