Sony GTK-XB7 - USB Device Operations; Before Using USB Devices

GTK-XB7
13
2-11. BOTTOM COVER + PLATE
5 four rubber (large circle)
two bosses
6 four screws
3 two rubber (small circle)
4 two screws
1 two rubber (square)
2 two screws
7 Remove the bottom cover + plate
in the direction of the arrow.
bond
+RZWRUHPRYHWKHERWWRPFRYHUSODWH
Note 1:
When removing the bottom cover + plate, move the bottom
cover + plate slowly and remove the bond as shown figure.
Note 2:
When removing the bottom cover + plate, please remove
carefully so as not to damage the bosses.
8 bottom cover + plate
Note 3:
When installing the
bottom cover + plate,
remove the used bond and use a new
bond to fix the bottom cover + plate.
top side
bottom side