Sony GTK-XB7 - Playing Music from USB

GTK-XB7
14
2-12. FRONT PANEL BLOCK
total nine bosses
cushion
cushion
4 Insert the jig into a space and raise
front panel block.
Note 1: When using a jig, please work
so as not to injure the cushion.
4 Insert the jig into a space and raise
front panel block.
Note 1: When using a jig, please work
so as not to injure the cushion.
5 All bosses are removed while moving
jig in the direction of the arrow, and
front panel block is removed.
5 All bosses are removed while moving
jig in the direction of the arrow, and
front panel block is removed.
front panel block
7 tweeter terminal
(narrow side)
7 tweeter terminal
(wide side)
1 screw
1 screw
2 four screws
3 prop (bottom)
6 Remove the front panel block
in the direction of the arrow.
8 front panel block
Note 2:
When installing the
front panel block
remove the used bond and use a new
bond to fix the front panel block.
speaker unit (TW) (SP4)
top side
bottom side