Usingthe
(MEMORYSET)menu
- BURST/QUALITY/IMAGESIZE/ALL
ERASE/NEWFOLDER,etc.
You can select items listed below on the
MEMORY SET menu. To select items, see
"Selecting menu items" (p. 62).
The defauh settings are marked with t>. The
indicators in parentheses appear when the
setting is selected. The settings you can ac_just
vaD- depending on the power mode of your
camcorder. The screen shows the items you can
currently operate. Unavailable items will be
grayed out.
EMORYSET
[] BURST
You can record several still images one after another. The number of images you
can record changes with the image size and space available on the "Memory Stick
Duo" you are using.
1 Select [NORMAL], [HIGH SPEED 1 (DCR-HC85) or [EXP. BRKTG],
and then touch [_.
DOFF
NORMAL (_)
HIGH SPEED
(0.-")
EXP. BRKTG
(BRK)
Select when not recording continuously
For DCR-HC65:
Select to record from 4 (1152 x 864 image size) to 13 (640 x 480
image size) images continuously at approximately 0 5-second
intervals.
For DCR-HC85:
Select to record from 4 ( 1600 x 1200 image size) to 25 (640 x 480
image size) images continuously at approximately 0 5-second
intervals.
For DCR-HC85:
Select to record up to 32 images (640 x 480 image size)
continuously at approximately 0 07-second intelvals.
Select to record 3 images consecutively with different exposures
at approximately 0 5-second intel_,_als. You can compare tlle 3
images and select an image recorded in the best exposure
2
3
Touch [_].
Press PHOTO fully.
In the [NORMAL] or [HIGH SPEED] (DCR-HC85) setting, the maximum
number of images are recorded as long as you are pressing PHOTO 11dly.
0 Note
• Tile flash (built-in Ol optional) will not timction while you are lecolding images
contizmously
• The maximmn number of images will be recorded in the self-time_ mode or when you are
opelating with tile Remote Commander.
70 Using the Menu
To Next Page
Loading...
Need help?
General