48
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) In the playback mode or the playback pause mode, press FN and select PAGE2
(p. 15).
(2) Press DIG EFFT. The screen to select a desired digital effect mode appears.
(3) Select a desired digital effect mode. In the STILL or LUMI. mode, the picture
where you select the mode is stored in memory as a still picture.
(4) Press –/+ to adjust the effect. Refer to page 39 for details.
(5) Press
OK to return to PAGE1/PAGE2.
To return to FN
Press EXIT.
To cancel the digital effect function
Press OFF to return to PAGE1/PAGE2.
Notes
•You cannot process externally input scenes using the digital effect function.
•To record pictures that you have processed using the digital effect, record the pictures
on the VCR using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect function are not output through the DV IN/
OUT jack.
When you set the POWER switch to OFF or stop playing back
The digital effect function is automatically canceled.
Playing back a tape with digital effects
1
2,3
FN
DIG
EFFT
OKOFF
STILL FLASH
LUMI. TRAIL
DIG EFFT
To Next Page
Loading...
Need help?
General