58
Editing partially on a DV tape – DV synchro-editing
Notes
•If you use other than Sony equipment with the DV jack, you cannot perform DV
synchro-editing.
•If a tape has a blank portion between recorded portions, DV synchro-editing may not
work correctly.
Errors in duplicating
If you connect your camcorder to Sony equipment with DV jack, the range of errors is
within +/– 5 frames.
The range may become wider in the following conditions.
•The interval between DV EDITING IN and OUT is less than five seconds.
•DV EDITING IN or OUT is set at the beginning of the tape.
If you do not make connections with i.LINK cable (DV connecting cable)
The screen shows NOT READY, and you cannot select DV EDITING.
On a blank portion of the tape
You cannot set DV EDITING IN or OUT.
To Next Page
Loading...
Need help?
General