10
3
2
English
Quick Start Guide
This chapter introduces you to the basic
features of your camcorder. See the page in
parentheses “( )” for more information.
Pull down the Holding Grip to hold your
camcorder as illustrated.
Inserting a cassette (p. 27)
Connecting the mains lead (p. 24)
Use the battery pack when using your camcorder outdoors (p. 18).
1Slide OPEN/ZEJECT
in the direction of the
arrow and open the
lid.
2Push the middle
portion of the back of
the cassette to insert.
Insert the cassette in a
straight line deeply
into the cassette
compartment with
the window facing
out.
3Close the cassette
compartment by
pressing the
mark on the cassette
compartment.
After the cassette
compartment goes
down completely,
close the lid until it
clicks.
Quick Start Guide
Holding Grip
AC power adaptor (supplied)
Connect the plug with its v
mark facing the Holding
Grip.
Open the DC IN
jack cover.
To Next Page
Loading...
Need help?
General