40
US
Capturing a photo
from a movie
1
Touch
(MENU) [Show
others] [PHOTO CAPTURE]
(under
[EDIT] category).
The [PHOTO CAPTURE] screen
appears.
2
Touch the movie to be captured.
The selected movie starts playback.
3
Touch at the point where
you want to capture.
The movie pauses. Play and pause
toggles as you press
.
4
Touch .
When capturing is finished, the screen
returns to pause.
The captured photo is saved on the
recording media selected in [PHOTO
MEDIA SET] (DCR-SR68/SR88/SX44/
SX63) (p
. 17).
To continue capturing, touch
, then
repeat steps from step 3.
To capture a photo from another movie,
touch
, then repeat steps from step 2.
ˎ
ˎ
ˎ
5
Touch
.
Notes
The image size is fixed depending on the aspect
ratio of the movie:
[
0.2M] in 16:9 (wide)
[VGA(0.3M)] in 4:3
The recording medium where you want to save
photos should have enough free space.
The recording date and time of captured photos
is the same as the recording date and time of
the movies.
If the movie you are capturing from has no data
code, the recording date and time of the photo
will be the date and time you captured from
the movie.
¦
ˎ
ˋ
ˋ
ˎ
ˎ
ˎ
Adjust the capturing point with more
precision after you selected the point with
.
Returns to the beginning of the selected
movie
To Next Page
Loading...
Need help?
General
