Do you have a question about the Sony HCD-GPX7G and is the answer not in the manual?
Brand | Sony |
---|---|
Model | HCD-GPX7G |
Category | Stereo System |
Language | English |
Details power output specifications for different models.
Lists input types and impedance requirements.
Specifies supported bit rates and sampling frequencies.
Covers frequency response, signal-to-noise ratio, and dynamic range.
Outlines FM/AM tuning ranges and tuner type.
Includes power requirements, dimensions, mass, and accessories.
Details methods to measure AC leakage current for safety.
Covers chip component replacement and laser diode safety.
Precautions for handling the optical pick-up block and flexible board.
Instructions for checking laser diode emission safely.
Characteristics and handling of unleaded solder.
Note on replacing IC502 and the DMB22 board.
Procedure to unlock the disc tray.
Outlines the sequential steps for disassembling the unit.
Details the procedure for removing the unit's outer case.
Instructions for removing the disc loading panel.
Steps for disassembling the front panel assembly.
Procedure for removing the CD mechanism.
Steps for accessing and removing the tuner board.
Procedure for removing the main board.
Instructions for disassembling the back panel.
Steps for removing the 4CH DAMP board.
Procedure for disassembling the chassis.
Instructions for removing the CD dust cover.
Steps for removing the optical pick-up assembly.
Procedure for removing the DMB22 board.
Steps for removing driver and switch boards.
Procedure for removing the sensor board.
Steps for removing the motor (TB) board.
Procedure for removing the motor (LD) board.
Checks LEDs, keys, display, software version, and model info.
Checks amplifier section operations, including volume and EQ settings.
Clears preset data to initial conditions, excluding history mode.
Clears all data, including preset data, to initial conditions.
Toggles AM channel step between 9 kHz and 10 kHz.
Moves optical pickup and clears EEPROM data for shipping.
Moves optical pickup to a vibration-durable position for shipping.
Locks the disc tray to prevent opening.
Loads factory default preset frequencies for FM and AM.
Displays total count of meter pointer touch and max switch.
Checks important data stored when PROTECTOR happened.
Checks types of protect occurred during protector on.
Checks the optical pick-up's eye pattern for CD playback quality.
Checks if the tuner automatically stops scanning at valid FM signals.
Illustrates main functional blocks and connections across sections.
Component and conductor layouts for various boards.
Detailed circuit schematics for various boards and sections.
Visual representations of signal patterns for diagnostic checks.
Functional block diagrams of key integrated circuits.
Details the function of each pin for specific ICs.
Exploded view of the unit's case and related parts.
Exploded view of the front panel assembly and its components.
Exploded view of the back panel and associated parts.
Exploded view of the internal chassis structure and components.
Exploded view of the CD mechanism parts (part 1).
Exploded view of the CD mechanism parts (part 2).
Lists all electrical components for the 4CH DAMP board.
Lists electrical components for the display board.
Lists electrical components for the DMB22 board.
Lists electrical components for the main board.
Lists electrical components for the MIC board.
Lists electrical components for the Tuner1AM3R board.