37
<FLICKER
REDUCTION>
P18
REDUCTION ON, OFF
, (OFF) (OFF): When format other than HFR is selected
Note
When you turn REDUCTION ON or OFF, noise may
be generated. This is not a malfunction.
POWER LINE
FREQUENCY
50
, 60 Specifies the frequency of the lighting power source.
MODE STANDARD
, ACM STANDARD: Corrects flicker without adding an
image.
ACM: Corrects flicker by adding images.
GAIN –99 to +99, 0
Enabled only when STANDARD is selected.
Sets the correction gain.
OFFSET –99 to +99, 0
Enabled only when STANDARD is selected.
Sets the brightness level that invokes correction.
ACM TYPE 1
, 2, 3, 4 Enabled only when ACM is selected.
Selects the combination of frames to add. More frames
are added as the value increases.
<HDR OPERATION>
P19
HDR MODE OFF
, LIVE HDR LIVE HDR is selected when OETF in <OUTPUT
FORMAT> is set to other than SDR.
SDR GAIN 0.0 to –15 dB, –6.0 dB
Enabled only when LIVE HDR is selected.
Gain setting applied to the SDR output.
HDR CONTRAST 100 to 566%, 200%
Enabled only when LIVE HDR is selected.
HDR output contrast ensured by setting SDR GAIN
(display only).
HDR BLACK OFFSET –99.9 to 99.9, 0
Enabled only when LIVE HDR is selected.
HDR output black offset
HDR KNEE OFF
, ON Enabled only when LIVE HDR is selected.
KNEE setting applied for HDR
POINT –99 to 99, 0
SLOPE –99 to 99, 0
HDR WHITE CLIP OFF, ON
LEVEL –99 to +99, 0
HDR BLACK CLIP OFF, ON Sets whether to clip levels 0% and lower for HDR
output.
OFF (fixed) is selected when OETF in <OUTPUT
FORMAT> is set to S-LOG3.
HDR BLACK
COMPRESSION
OFF
, ON Sets whether to compress low brightness areas for
HDR output.
<OPTICAL FITER>
P20
ND 1
, 2, 3, 4, 5 1: Clear
2: 1/4ND
3: 1/8ND
4: 1/16ND
5: 1/64ND
CC A, B
, C, D A: Cross filter
B: 3200K
C: 4300K
D: 6300K
PAINT
Page name
Page No.
Item Settings Description
To Next Page
Loading...
