Sony HDC-P31 User Manual

SERVICE MANUAL
1st Edition (Revised 1)
MULTI PURPOSE CAMERA
HDC-P50
HDC-P31
利用条件:
① 本情報はソニー製品の販売，設置，設定，使用の目的でのみご利用ください。かかる
目的以外での利用を禁止します。
② 著作者の事前の書面による許可なく，本情報の全部または一部の複写，複製，転載，
改変，翻訳，送信等を禁止します。
情報改訂:
本情報は，当社の裁量により，予告なく変更されることがあります。ご使用される場合，
本情報が最新の情報であることを確認のうえ，ご使用ください。
Conditions of Use:
(1) Please use this information only for the purpose of sales, installation, configuration,
and use of Sony products. Using this information for any purpose other than the purpose
described foregoing is forbidden.
(2) Do not copy, replicate, reproduce, alter, translate, transmit, sell, lease, or distribute this
information in whole or in part without the prior written permission of the author.
Revision of Information:
This information may be changed or updated at any time without any prior notice. Please
confirm that this information is up-to-date before using it.

Sony HDC-P31 Specifications

General

Video Resolution	1920 x 1080
Effective Pixels	2.1 MP
Frame Rate	59.94/50/29.97/25/23.98
Filter Wheel	1/4ND, 1/64ND
HD Output	HDMI
Weight	Approx. 1.5 kg
Sensor Type	3x 2/3-inch Exmor CMOS

Summary

SERVICE MANUAL

Conditions of Use

Usage restrictions for the information provided, including sales, installation, configuration, and use of Sony products.

Section 1 Service Overview

1-1. Checking before Installation

Procedure to check ROM and software versions on peripheral equipment before connecting to the camera.

1-3. Connectors and Cables

Identification and specifications of various connectors and cables used with the camera.

Section 2 Periodic Maintenance and Inspection

2-3. Replacing Lithium Battery

Instructions and precautions for replacing the lithium secondary battery.

Section 4 Replacement of Main Parts

4-1. Precautions before Work

General precautions and safety guidelines to follow before performing part replacement.

4-1-1. Tightening Torque

Specifications for tightening torque values for various screws used in the unit.

Section 5 Electrical Alignment

5-1-1. Required Equipment and Tool

List of necessary equipment and tools for performing electrical alignment.

Section 6 Software Upgrade

6-1. Upgrading Software Programs

Procedures for upgrading camera application and operating system software via USB.

6-1-1. Upgrading Camera Application

Step-by-step guide for updating the camera application software.

6-1-2. Upgrading OS

Section 10 Spare Parts

10-2. Exploded Views