69
5-1-2. File Data at Adjustment
The file structure of the adjustment data of this unit is as follows.
For detail of adjustment data, refer to “Section 7 File System”.
Reference File
• The reference file stores the custom paint data adjusted by the video engineer as standard paint data.
• The service engineer can store reference file in the camera and USB drive.
• The reference file stored in the USB drive (For back up) can be reset after adjustment.
Lens File
• Lens file is used for compensating the deviation generated by switching the lens extender from OFF to ON and for compensating
the difference in the characteristics between lenses.
• The lens file is saved to a camera.
• When adjusting with lens file, mount the lens that customers actually use.
OHB File
• OHB file is used for the CMOS block maintenance.
• OHB file is saved in the camera.
Scene
Reference
File data Total adjustment data
Lens
OHB
To Next Page
