Sony HDCU2500 - Optional Unit Specifications

57
HKCU2040 (optional)
The high dynamic range (HDR) function will be supported by
the HDCU2000/2500 software version V3.10 or higher.
Design and specifications are subject to change without
notice.
HKCU2007 (optional)
Design and specifications are subject to change without
notice.
HKCU1001 (optional)
Design and specifications are subject to change without
notice.
General
Power supply 23.5 W
Operating temperature –10°C to +40°C (+14°F to 104°F)
Storage temperature –20°C to +60°C (–4°F to 140°F)
Dimensions (w/h/d) DPR board: Approx. 19 × 110 × 226 mm
(3/4 × 4 3/8 × 9 inches)
DIF board: Approx. 19 × 98 × 159 mm
(3/4 × 3 7/8 × 6 3/8 inches)
HIF board: Approx. 19 × 98 × 159 mm
(3/4 × 3 7/8 × 6 3/8 inches)
Mass DPR board: Approx. 0.35 kg (12 oz)
DIF board: Approx. 0.15 kg (5.3 oz)
HIF board: Approx. 0.09 kg (3.2 oz)
Output connectors
DIF board
SDI OUT BNC-type (4)
12G-SDI: SMPTE ST2082, 0.8 Vp-p,
75 ohms, 11.880 Gbps/11.868 Gbps
3G-SDI: SMPTE ST424/ST425, 0.8 Vp-p,
75 ohms, 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
12G-SDI/3G-SDI/HD-SDI selectable
HIF board
SDI OUT BNC-type (4)
3G-SDI: SMPTE ST424/ST425, 0.8 Vp-p,
75 ohms, 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
3G-SDI/HD-SDI selectable
Character ON/OFF selectable (connectors
3/4)
General
Power supply 5.5 W
Operating temperature –10°C to +40°C (+14°F to 104°F)
Storage temperature –20°C to +60°C (–4°F to 140°F)
Dimensions (w/h/d) DRX board: Approx. 19 × 110 × 226 mm
(3/4 × 4 3/8 × 8 7/8 inches)
HIF board: Approx. 19 × 98 × 159 mm
(3/4 × 3 7/8 × 6 1/4 inches)
Mass DRX board: Approx. 0.24 kg (8 oz)
HIF board: Approx. 0.09 kg (3 oz)
Output connectors
HIF board
SDI OUT BNC-type (4)
3G-SDI: SMPTE ST424/ST425, 0.8 Vp-p,
75 ohms, 2.970 Gbps/2.967 Gbps
HD-SDI: SMPTE ST292, 0.8 Vp-p,
75 ohms, 1.485 Gbps/1.4835 Gbps
3G-SDI/HD-SDI selectable
Character ON/OFF selectable (connectors
3/4)
General
Power supply 2.5 W
Operating temperature –10°C to +40°C (+14°F to 104°F)
Storage temperature –20°C to +60°C (–4°F to 140°F)
Dimensions (w/h/d) EN-A board: Approx. 19 × 110 × 226 mm
(3/4 × 4 3/8 × 8 7/8 inches)
VDA-A board: Approx. 19 × 98 × 159 mm
(3/4 × 3 7/8 × 6 1/4 inches)
Mass EN-A board: Approx. 0.22 kg (7.8 oz)
VDA-A board: Approx. 0.10 kg (3.5 oz)
Output connectors
VDA-A board
VBS BNC-type (2), 1.0 Vp-p, 75 ohms, VBS
PIX OUT BNC-type (1), VBS/R/G/B (VBS 1.0 Vp-p,
75 ohms)
WF OUT BNC-type (1), VBS/R/G/B/SEQ (VBS
1.0 Vp-p, 75 ohms)
Supplied accessories
4-pin connector (1)