4
Overview
Also, the HDCU2080/2580 is equipped with an alarm indicator
to warn of open or short circuits in the cable.
Wide range of audio functions
This unit has connectors for two-channel analog audio
outputs, a digital audio output (HDCU2080 only), and a
program audio input. Further, the HDCU2080/2580 can use an
intercom system with two independent channels, and supports
four-wire and RTS/Clear-Com intercom systems.
For information on support for RTS/Clear-Com systems,
contact a Sony service or sales representative.
Remote control
The level and phases of this unit’s output signals can be
controlled remotely by an MSU-1000 series Master Setup
Unit.
Microphone volume control
The camera’s microphone volume can be controlled via the
MIC REMOTE connector, MSU, or RCP.
Character monitor signal output
The results of the HDCU2080/2580 self-diagnosis and setup
menu can be obtained with a text display by character signal
output.
Rack mountable
This unit may be installed in a standard EIA 19-inch rack (three
units high).
(The HDCU2580 needs the RMM-301 Rack Mount Adaptor
(optional).)
Plug-in unit configuration
Internal printed circuit boards are designed for easy plug-in
and removal, which makes it easy to inspect and maintain the
unit.
To Next Page
Loading...
