Sony HT-CT390 - File Compatibility and System Specifications; Supported File Types and Audio Formats; Bar Speaker Technical Specifications

27
GB
Additional Information
Playable types of files
• Some files may not play depending on
the file format, the file encoding, or the
recording condition.
• Some files edited on a PC may not play.
• The system does not play coded files such
as DRM and Lossless.
• The system can recognize the following
files or folders in USB devices:
–up to 200 folders
– up to 150 files/folders in a single layer
• Some USB devices may not work with this
system.
• The system can recognize Mass Storage
Class (MSC) devices.
Supported audio formats
Audio formats supported by this system
are as follows.
• Dolby Digital
•DTS
• LPCM 2ch
•AAC
Specifications
Amplifier section
POWER OUTPUT (rated)
Front L + Front R:
50 W + 50 W (at 4 ohms, 1 kHz, 1%
THD)
POWER OUTPUT (reference)
Front L/Front R: 100 W (per channel at
4ohms, 1kHz)
Inputs
USB
ANALOG IN
TV IN OPTICAL
Output
HDMI OUT TV (ARC)
HDMI section
Connector
Type A (19pin)
USB section
(USB) port
Type A
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power Class
1
Maximum communication range
Line of sight approx. 25 m
1)
Frequency band
2.4 GHz band (2.4000 GHz –
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
2)
A2DP 1.2 (Advanced Audio Distribution
Profile)
AVRCP 1.6 (Audio Video Remote
Control Profile)
Supported Codecs
3)
SBC
4)
, AAC
5)
Transmission range (A2DP)
20 Hz – 20,000 Hz (Sampling
frequency 32 kHz, 44.1 kHz, 48 kHz)
Codec Extension
MP3 (MPEG-1 Audio
Layer III)
.mp3
AAC .m4a
WMA9 Standard .wma
LPCM .wav
Notes
Bar Speaker (SA-CT390)