Sony HT-CT390 User Manual

8
GB
About the standby mode
The subwoofer enters standby mode
automatically and the power indicator
turns red when the Bar Speaker is in
standby mode or wireless transmission
is deactivated. The subwoofer turns on
automatically when the Bar Speaker is
turned on and wireless transmission is
activated.
 INPUT (page 9)
 (power)
Turns on the system, or sets it to
standby mode.
 DIMMER
Adjusts the brightness of the top
panel display.
“BRIGHT”  “DARK”  “OFF”
• The top panel display is turned
off when “OFF” is selected. It
turns on automatically when
you press any buttons, then
turns off again if you do not
operate the system for several
seconds. However, in some
cases, the top panel display
may not turn off. In this case,
the brightness of the top panel
display is same as “DARK”.
 MENU
Turns on/off the menu in the top
panel display.
/
Selects the menu items.
ENTER
Enters the selection.
BACK
Returns to the previous display.
Stops USB playback.
 (volume) +*/–
Adjusts the volume.
 SW  (subwoofer volume) +/–
(page 21)
Adjusts the volume of bass
sound.
 (muting)
Turns off the sound temporarily.
 CLEARAUDIO+
Automatically selects the suitable
sound setting for the sound
source.
 SOUND FIELD (page 11)
Selects a sound mode.
Remote control

Sony HT-CT390 Specifications

General

Game mode	Yes
Audio decoders	Dolby Digital, Dolby Dual Mono
RMS rated power	300 W
Audio output channels	2.1 channels
Soundbar speaker RMS power	- W
Subwoofer connectivity	Wireless
Cables included	Optical
Receiver included	-
FM radio	No
Product color	Black
Audio formats supported	LPCM, PCM
Bluetooth profiles	A2DP, AVRCP
Apple docking compatibility	Not supported
Power consumption (standby)	20 W
Power consumption (typical)	45 W
Connectivity technology	Wired & Wireless

Weight and Dimensions

Soundbar weight	2200 g
Subwoofer depth	362 mm
Subwoofer width	170 mm
Subwoofer height	342 mm
Subwoofer weight	6500 g
Main unit dimensions (WxDxH)	900 x 121 x 52 mm