EasyManua.ls Logo

Sony HT-NT3 - Supported Audio Formats List; System Specifications; Bar Speaker Specifications

Sony HT-NT3
204 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
US
HT-NT3
4-559-515-12(1)
D:\NORM'S JOB\SONY HA\SO150013\HT-NT3 (PMRF
05)\4559515121_USCaFRLaES (UC2)\US\070ADD.fm
masterpage:
Right
Additional Information
Supported audio formats
Audio formats supported by this system
are as follows.
: Supported format.
: Unsupported format.
* Decoded as DTS core.
Specifications
Amplifier section
USA models only:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 300 Hz – 20,000 Hz; rated
50 watts per channel minimum RMS
power, with no more than 1% total
harmonic distortion from
250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R:
133 W (per channel at 4 ohms, 1 kHz)
Other models:
POWER OUTPUT (rated)
Front L + Front R:
60 W + 60 W (at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R:
133 W (per channel at 4 ohms, 1 kHz)
Inputs
HDMI IN 1*/2/3
TV (DIGITAL IN)
ANALOG IN
Output
HDMI OUT* (ARC)
* HDMI IN 1 and HDMI OUT jacks support
HDCP 2.2 protocol. HDCP 2.2 is newly
enhanced copyright protection
technology that is used to protect
content such as 4K movies.
HDMI section
Connector
Type A (19pin)
USB section
(USB) port:
Type A (For connecting USB memory,
memory card reader, and digital still
camera)
Format
Input
[HDMI1]
[HDMI2]
[HDMI3]
[TV]
(DIGITAL IN)
LPCM 2ch

LPCM 5.1ch

LPCM 7.1ch

Dolby Digital

Dolby TrueHD,
Dolby Digital Plus

DTS

DTS-ES Discrete 6.1,
DTS-ES Matrix 6.1
* *
DTS96/24
* *
DTS-HD High
Resolution Audio

DTS-HD Master
Audio

DTS-HD Low Bit
Rate

DSD

Bar Speaker (SA-NT3)

Table of Contents

Other manuals for Sony HT-NT3

Related product manuals