Sony HT-ST3 - Configuring System Settings

16
HT-ST3 4-467-146-11(1)
Adjusting the settings / Ajuste de la configuración
PressMENUontheremotecontrol,thenselectthedesiredsettingusing

/

/ENTER/RETURN.
Menu Function Default
LEVEL
DRC
(DYNAMICRANGE
CONTROL)
YoucanenjoyDolbyDigitalsoundatlowsoundvolumes.(ON/AUTO/OFF)
ON:Compressessoundinaccordancewiththecompressioninformation
contained in the content.
AUTO:AutomaticallycompressessoundencodedinDolbyTrueHD.
AUTO
AUDIO
SYNC
(AVSYNC)
Youcanadjustthesoundwhentheimageandthesoundarenotinsync.(1–4/
OFF)
OFF
DUAL
(DUALMONO)
YoucanenjoymultiplexbroadcastsoundofDolbyDigitalaudio.(M/S(mainand
subchannels)/MAIN(mainchannel)/SUB(subchannel))
MAIN
S. OPT
(SOUNDOPTIMIZER)
Adjusts the sound so that it is reproduced dynamically and more clearly even at
lowsoundvolumes.(ON/OFF)
OFF
HEQ
(HARMONICSEQUALIZER)
Reproduces the very low volume sounds that tend to be eliminated by audio
compression.(ON/OFF)
Note:HEQfunctionsonlywhen“ANALOG/BTAU”isselected.Thisdoesnotfunction
with any other inputs, even though the item is displayed on the front panel.
ON
AAV
(ADVANCEDAUTO
VOLUME)
Reduces the volume discrepancies between different programs or between
programsandcommercials.(ON/OFF)
OFF
HDMI
CTRL
(CONTROLFORHDMI)
SwitchestheControlforHDMIfunctiononoroff.(ON/OFF)
Fordetails,refertotheReferenceGuide.
ON
P. THRU
(PASS THROUGH)
Sets the power saving mode of the pass-through function of HDMI signals.
(AUTO/ON)
AUTO:OutputssignalsfromtheHDMIOUTARC(TV)jackofthesystemin
standby mode when the TV is turned on. This setting saves power in
standbymodecomparedwiththe“ON”setting.
ON:AlwaysoutputssignalsfromtheHDMIOUTARC(TV)jackinstandbymode.
Note:Thisitemappearsonlywhen“CTRL(CONTROLFORHDMI)”issetto“ON.”
AUTO
ARC
(AUDIORETURN
CHANNEL)
Allows you to listen to digital sound from a TV compatible with the Audio Return
Channel(ARC)technologyisconnectedusinganHDMIcable.(ON/OFF)
Note:Thisitemappearsonlywhen“CTRL(CONTROLFORHDMI)”issetto“ON.”
ON
SET BT
BT.STBY
(BLUETOOTHSTANDBY)
When the system has pairing information, the system is in BLUETOOTH standby
modeevenwhenitisturnedoff.(ON/OFF)
Note:DuringBLUETOOTHstandbymode,theBLUETOOTHindicatorflashesin
blue slowly.
OFF
AAC
(ADVANCEDAUDIO
CODING)
SetswhetherornotthesystemwilluseAACviaBLUETOOTH.(ON/OFF)
Note:Ifyouchangethesettingwhenthesystemisconnectedwitha
BLUETOOTH device, the system will be disconnected from the device.
OFF
MENU

/

ENTER
RETURN