Sony HT-ST9 - Audio and Bluetooth Settings

•
[SBM] (Super Bit Mapping)
[On]: Smooths
the gradation
of
video
signals
output
from the
HDMI
OUT
(ARC)
jack.
[Off]:
Select
this
if
video
signals
are distorted or
color
is
unnatural.
•
[OSEE
HX]
This function
is
only available
when [Music]
is
selected
as
the sound
field.
[On]: Upscales
the audio
file
to
a
High-Resolution
Audio
file
and
reproduces the
clear
high-range sound which
is
often
lost (page
10).
[Off]:
Off
•
[Audio
DRC]
You
can
compress the dynamic range
of
the sound track.
[Auto]:
Automatically
compresses sound encoded in
Dolby TrueHD.
[On]:
The
system reproduces the sound track with
the
kind
of
dynamic range
that
the
recording engineer intended.
[Off]:
No
compression
of
dynamic range.
•
[Attenuation settings -
Analog]
Distortion may occur when you
listen
to
a device connected
to
the
ANALOG
IN
jacks. You can prevent distortion by attenuating the
input
level
on the system.
[On]:
Attenuates the
input
level.
The
output
level will decrease at this
setting.
[Off]:
Normal input
level.
•
[Audio Output]
You
can
select
the
output
method used for audio
signal
output.
[Speaker]: Outputs
multi-channel
sound from the system's speakers
only.
[Speaker+
HDMI]:
Outputs
multi-channel
sound from the system's
speakers and
2-channellinear
PCM
signals
from the
HDMI
OUT
(ARC)
jack.
24US
[HDMI]:
Outputs sound from the
HDMI
OUT
(ARC)
jack
only.
Sound
format
depends on
the
connected device.
-
When
[Control
for
HDMI]
is
set
to
[On] (page
25),
[Audio Output]
is
set
to
[Speaker+ HDMI] automatically
and this setting cannot be changed .
•
[Biuetooth Mode]
You
can
enjoy content
from
a remote device by using this system or
listen
to
sound from this system by using another device such
as
headphones.
[Receiver]: This system
is
in receiver mode, which enables
it
to
receive and
output
audio from the remote device .
[Transmitter]: This system
is
in
transmitter mode, which
enables
it
to
send audio
to
the remote device.
[Off]: The
BLUETOOTH
device power
is
turned
off
and you cannot
select the [Biuetooth Audio] input.
-
You
can
connect to a remote device by using the
One-touch listening
function even
if
you have set [Biuetooth Mode]
to
[Off].
•
[Device List]
Displays
a
list
of
paired and detected
BLUETOOTH
devices
(SNK
device) when [Biuetooth Mode]
is
set
to
[Transmitter].
•
[Biuetooth Standby]
You
can
set the [Biuetooth Standby]
so
that the system can be
turned on by a
BLUETOOTH
device even when the system
is
in
standby mode. This function
is
only available
when you set
[Biuetooth Mode]
to
[Receiver] or [Transmitter].
[On]: The system turns on automatically
when you
establish
a
BLUETOOTH
connection from a paired
BLUETOOTH
device.
[Off]: Off