Sony HT-ST9 - Input Skip and Easy Setup Options

•
[Auto Renderer
Access
Permission]
[On]: Allows
automatic access from a newly
detected home network
controller.
[Off]:
Off
•
[Renderer Access
Control]
Displays
a list
of
home network controller-compatible
products and
sets whether or
not
to
accept commands from the controllers
in
the
list.
• [External Control]
[On]: Allows
the home automation
controller
to operate this system.
[Off]: Off
•
[Remote Start]
[On]: Allows you
to
turn on the system by a device
linked
via a
network when the system
is
in
standby mode.
[Off]:
The system cannot be turned on by a device
linked
via a
network.
The skip setting
is
a convenient feature
that
allows
you
to
skip
unused inputs when
selecting a function by pressing
INPUT.
[Do
not
skip]: The system does
not
skip the selected input.
[Skip]: The system skips the
selected
input.
-
When you press
INPUT
during the home menu
is
displayed, input icon
appears
dimmed
if
it
has
been set
to
[Skip].
Run
[Easy Setup]
to
make the basic initial
settings and the basic
network settings
for the system.
Follow the on-screen instructions.
Runs
[Easy Network Settings]
to
make the basic network settings.
Follow
the on-screen instructions.
•
[Reset
to
Factory
Default
Settings]
You
can
reset the system settings
to
the factory default by selecting
the group
of
settings. All the settings within the group
will
be reset.
• [Initialize Personal Information]
You
can
erase your
personal
information stored on the system.
-
If
you dispose, transfer or resell this system, please delete
all Personal
Information
for
security purposes. Please take appropriate measures
such
as
logging out after using a network service.
27US
"'
tD
r+
~
::::::s
~
"'
01
::::::s
a.
)>
a.
-·
c
"'
r+
3
tD
::::::s
r+
"'