Sony HT-ST9 - Network Settings

[Off]:
No
signals
are
output
when system in standby mode. This
setting saves
power
in
the
standby
mode
compared
to
the [On]
setting.
• [Quick Start
Mode]
[On]: Shortens
the
startup
time
from standby mode. You can operate
the system
quickly
after
turning
it on.
[Off]:
Off
• [Auto Standby]
[On]: Turns on the [Auto Standby] function. When you do
not
operate
the
system
for
about
20
minutes, the system enters standby
mode
automatically.
[Off]: Off
•
[Auto Display]
[On]:
Automatically
displays information on the
TV
screen when
changing
the
audio signals, picture mode, etc.
[Off]: Displays information
only
when
you press
DISPLAY.
• [Software Update Notification]
[On]:
Sets
the system
to
inform you
of
latest
software version
information (page
22).
[Off]:
Off
• [Device Name]
You
can
change the name
of
this system according
to
your
preference
so
that
it
is
more recognizable when using
the
[Biuetooth
Audio] or [Screen mirroring] function. The name
is
also
used
with
other networks, such
as
the
home network. Follow
on-screen
instructions
and use
the
software keyboard to enter
the
name.
• [System Information]
You
can
display
the system's software version information and
the
MAC
address.
26US
•
[Software License Information]
You
can
display
the
Software License
Information.
• [Internet Settings]
Connect
the
system
to
the
network beforehand.
[Wired Setup]:
Select
this when
you connect
to
a broadband router
using a
LAN
cable.
[Wireless Setup(built-in)]: Select this when you use
the
built-in Wi-Fi
function
of
the system
to
connect
to
a wireless network.
Tip
For
further details, visit
the
following
website and check the
FAQ:
http:
I
lwww.
sony. com
I
sound
ba
rsu
p
port
•
[Network Connection Status]
Displays
the
current
network
connection status.
•
[Network Connection Diagnostics]
You
can
run
the
network
diagnostic
to
check
if
the
network
connection has been made properly.
•
[Screen mirroring
RF
Setting]
If
you use
multiple wireless systems, such
as
a wireless
LAN,
the
wireless
signals
may be unstable.
In
this case, playback stability may
be improved by setting
the
priority radio frequency channel
for
Screen mirroring.
[Auto]: Normally select
this. The system
automatically selects the
best channel
for
Screen mirroring.
[CH
1]/[CH 6]/[CH
11]:
The selected
channel
is
prioritized
for
Screen
mirroring connection.
• [Connection Server Settings]
Sets
whether
or
not
to
display the connected home
network
server.