Sony HT-XT1 User Manual

8
GB
One-Touch connection using the Android device with the
NFC function built-in (NFC)
1 Perform steps 1 to 3 of “When using an Android device.”
2 After the BLUETOOTH connection display appears on the
Android device, touch the Android device with the N mark of
the system.
When the connection has been established, the illumination LED
(blue) of the system lights.
3 Operate the system with the display of the Android device.
1 Touch the  (on/standby) touch key of the system.
The display of the system lights after the system turns on.
2 Touch the PAIRING touch key of this system.
The illumination LED (blue) of the system flashes quickly during
BLUETOOTH pairing.
3 Set the iPhone/iPod touch to pairing mode and select
“SONY:HT-XT1” from the BLUETOOTH device list on the
iPhone/iPod touch.
When the connection has been established, the illumination LED
(blue) of the system lights.
4 Search for “SongPal” with the connected iPhone/iPod touch
and download that application.
5 Run “SongPal” then operate the system with the display of
the iPhone/iPod touch.
Illumination LED (blue)
When using an iPhone/iPod touch

Sony HT-XT1 Specifications

General

Audio decoders	Dolby Digital Plus, Dolby TrueHD, DTS 96/24
RMS rated power	170 W
Audio output channels	2.1 channels
Subwoofer included	Yes
Receiver included	-
FM radio	No
Product color	Black
Apple docking compatibility	Not supported
HDMI in	3
HDMI ports quantity	4
Number of HDMI outputs	1
Connectivity technology	Wired & Wireless
Power consumption (standby)	0.5 W
Power consumption (typical)	34 W

Weight and Dimensions

Depth	310 mm
Width	720 mm
Height	72 mm