How to fix no sound on my Sony HTP-1200?
If your Sony Home Theater System isn't producing any sound or the sound is very low, verify that the speakers and components are securely and correctly connected. Ensure both the receiver and all components are powered on and that you've selected the correct component on the receiver. Also, check that the MASTER VOLUME isn't set to 'VOL MIN' and that the muting function is off by pressing MUTING.
What to do if my Sony Home Theater System displays 'PROTECT'?
If your Sony Home Theater System displays 'PROTECT', it means there might be an irregular current output from the speakers. Check the speaker connections and then turn the power on again. If the problem continues after this, no answer.
What to do if there is no sound from a specific component on Sony HTP-1200?
If you are not getting sound from a specific component on your Sony Home Theater System, check that the component is correctly connected to the appropriate audio input jacks. Ensure that the cords are fully inserted into the jacks on both the receiver and the component. Also, verify that you've selected the correct component on the receiver.
How to fix unbalanced sound on my Sony HTP-1200 Home Theater System?
If you are experiencing unbalanced or reversed left and right sounds on your Sony Home Theater System, first check that the speakers and components are securely and correctly connected. If the issue persists, adjust the balance parameters in the LEVEL menu.
Why is there no sound from the subwoofer on my Sony HTP-1200 Home Theater System?
If you are not getting any sound from the subwoofer of your Sony Home Theater System, check that the subwoofer is securely and correctly connected.
How to troubleshoot center or surround speakers with low sound on a Sony HTP-1200?
If there's no sound or very low sound from the center and/or surround speakers on your Sony Home Theater System, ensure the sound field function is activated by pressing SOUND FIELD + or SOUND FIELD –. You can also select a CINEMA STUDIO EX mode. Furthermore, you can adjust the speaker level.
Why is the surround sound not working on my Sony HTP-1200 Home Theater System?
If you're not getting a surround effect from your Sony Home Theater System, make sure the sound field function is turned on by pressing SOUND FIELD + or SOUND FIELD –. Also, sound fields do not function for signals with a sampling frequency higher than 48 kHz.
Why is my Sony HTP-1200 remote not working?
If your Sony Home Theater System remote isn't working, make sure you're pointing it at the remote sensor on the receiver and that there are no obstacles in the way. If the batteries are weak, replace them with new ones. Ensure you've selected the correct input on the remote. Note that the AUX button is not for receiver operation. To activate buttons with orange printing, press ALT first. For receiver operation using the V/v/B/b buttons, press MAIN MENU first; for other components, press TOP MENU/GUIDE or AV MENU after the function button.
How to eliminate hum or noise from my Sony HTP-1200?
If there is severe hum or noise coming from your Sony Home Theater System, ensure that all speakers and components are securely connected. Check that connecting cords are away from transformers, motors, TVs, or fluorescent lights (at least 3 meters away). You can also try moving your TV away from the audio components. Clean the plugs and jacks with a cloth slightly moistened with alcohol.
Why is Dolby Digital or DTS not working on my Sony Home Theater System?
If you're not getting Dolby Digital or DTS multi-channel sound from your Sony Home Theater System, make sure the DVD or other media you're playing is recorded in Dolby Digital or DTS format. When connecting a DVD player to the receiver's digital input jacks, check the audio settings (audio output settings) of the connected component.
General| Number of Channels | 5.1 |
|---|---|
| Bluetooth | Yes |
| HDMI Input | 3 |
| HDMI Output | 1 |
| Type | Home Theater |
To Next Page
