44
Processing Recorded Data
Chapter 4 Recording and Playback
5
Use the V, v, B, and b buttons to select [Execute], and
press the ENTER button.
The [Save to] screen appears.
6
Configure save settings for the recorded data.
Select an item using the
V and v buttons, and press the
ENTER button to display the setting screen for that
item.
[External Media]
Select the storage destination, and press the ENTER
button.
[Storage Format]
Select the storage format to use when copying to
external media, and press the ENTER button.
When saving recorded data in AVCHD format to
servers, do not specify the same share name (i.e., share
folder) on the same server as the storage destination
for multiple recorders. Performing multiple saving
operations at the same time may result in damage to
the recorded data.
When recording to a DVD on the HVO-550MD,
additional recording is only possible when recording
identical formats. Additional recording will not be
possible if you change the storage format in the middle
of recording. For example, if you are saving to a DVD
in AVCHD format, you cannot change the format to
MP4 and perform additional recording.
[File Server]
If [SERVER] is selected as the external storage
destination, select a file server (the server configured
in the system administrator settings or the server
configured for each examiner), and press the ENTER
button.
7
Use the V and v buttons to select [Execute], and press
the ENTER button.
Copying of recorded data starts.
Note
Tip
To Next Page
Loading...
Need help?
General
Weight and Dimensions
