Chapter 3 Dubbing/Editing
Chapter 3 Dubbing/Editing 43
Audio Dubbing
You can record just sound on a recorded tape.
(Audio dubbing)
Notes
•You can dub the sound onto a DVCAM-formatted
tape (recorded) in the 32 kHz audio mode (4-channel/
12 bits). You cannot dub sound recorded in 48 kHz
(2-channel/16 bits) audio mode on a tape or a tape
recorded in nonstandard audio.
• If the audio mode of the recorded tape is 32 kHz, you
can dub the sound regardless of the [AUDIO MODE]
setting on the [AUDIO SET] menu. (p. 47)
• The sound is dubbed only onto channels 3/4.
You cannot dub the sound onto either of them or
channels 1/2.
Connection of external devices
The following shows an example of a basic connection
for audio dubbing.
Sound source
Audio output
AUDIO IN
AUDIO OUT
Analog video output
Audio input
Video input
Headphones
This unit (front panel)
PHONES
: Signal flow
To Next Page