2
TABLE OF CONTENTS
ICF-M410L
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
1. GENERAL ·································································· 3
2. DISASSEMBLY ························································· 4
3. ELECTRICAL ADJUSTMENTS ····························· 5
4. DIAGRAMS
4-1. Block Diagram ····························································· 7
4-2. Schematic Diagram ······················································ 8
4-3. Printed Wiring Board ··················································· 9
4-4. IC Pin Function Description ······································ 10
4-5. IC Block Diagram ······················································ 10
5. EXPLODED VIEWS ················································ 11
6. ELECTRICAL PARTS LIST ·································· 12
To Next Page
Loading...
