1-7 (E)
ICP-6520/6530/3000/6511
2. Remove the module covers on both sides.
3. Remove the innermost module. (Refer to “1-11. Re-
moving the Module”.)
1-4. Installing the ICP-6520/6530/3000
n
When installing the ICP-6520, ICP-6530 and ICP-3000
into the control console, be sure to install it with two
persons or more.
Install these by following the procedure described below.
* The illustration indicates ICP-3000.
Parts required
. For the ICP-6530/3000
Screws (B4 x 6): 6 pcs
. For the ICP-6520
Screws (B4 x 6): 4 pcs
1. Raise the control panel with two or more people, and
then the other person holds the control panel and fits it
into the control console.
Control panel
Control console
Control panel
Module cover
Module cover
Module
To Next Page
Loading...
