Sony ICP-6530 - 2 Service Overview; Troubleshooting; Icp-6520;6530;3000; Icp-6511

2-1 (E)
ICP-6520/6530/3000/6511
Section 2
Service Overview
Switched and indicators, etc. on the panel are not lit
Flow3
2-1-2. ICP-6511
No image is displayed on the menu screen.
Flow4
2-1. Troubleshooting
2-1-1. ICP-6520/6530/3000
The status indication lamp A/B is not lit in green
Flow1
The unit does not start (POWER switch is not lit)
Flow2
Turn on the power switch
(A/B).
YES
YES
NO
The status indication lamp
A/B is not lit in green.
Is the internal power switch
(A/B) turned on?
Connect the power cord
correctly.
YES
NO
Is the power cord connected
correctly?
The possible cause is the
power unit failure.
Check the item in Flow1
“The status indication lamp
A/B is not lit in green”.
YES
YES
NO
The POWER switch is not lit.
Is the status indication lamp
lit?
The possible cause is the
failure of this unit.
Check the item in Flow1
“The status indication lamp
A/B is not lit in green”.
YES
NO
Switched and indicators, etc.
on the panel are not lit.
Is the status indication lamp
lit?
Check the item in Flow2
“The unit does not start.
(POWER switch is not lit)”.
NO
NO
Is the POWER switch lit?
Connect the LAN cable.
The possible cause is the
failure of this unit.
Is the MVS LAN cable
connected to the connector
(MVS) of this unit?
YES
YES
YES
Connect the AC adapter.
YES
YES
NO
No image is displayed on
the menu screen.
Is the AC adapter connected
correctly?
Connect the DVI cable and
USB cable with
ICP-6520/6530/3000.
NO
NO
Is the connecting cable
connected correctly?
The possible cause is the
failure of ICP-6511.
YES
YES
The possible cause is the
failure of the LCD panel or
drive circuit of ICP-6511.
Is the ICP-6511 switch lit?