Need help?Do you have a question about the Sony KDL-26V4000 and is the answer not in the manual?
General| Audio system | Virtual Dolby |
|---|---|
| RMS rated power | 20 W |
| Noise reduction | Yes |
| Headphone connectivity | 3.5 mm |
| Comb filter | Digital |
| Display diagonal | 26 \ |
| Display brightness | 500 cd/m² |
| Display resolution | 1366 x 768 pixels |
| Native aspect ratio | 16:9 |
| Supported video modes | 1080i, 480p, 576i, 576p, 720p |
| Contrast ratio (dynamic) | 30000:1 |
| HDMI ports quantity | 3 |
| SCART ports quantity | 2 |
| Product color | Black |
| Panel mounting interface | 200 x 100 mm |
| Power consumption (standby) | 0.7 W |
| Power consumption (typical) | 69 W |
| Tuner type | Analog & digital |
| Analog signal format system | PAL, SECAM |
Weight and Dimensions| Depth (with stand) | 242 mm |
|---|---|
| Width (with stand) | 659 mm |
| Height (with stand) | 505 mm |
| Weight (with stand) | 12500 g |
| Depth (without stand) | 95 mm |
| Height (without stand) | 466 mm |
| Weight (without stand) | 10000 g |
Steps to remove the TV's rear cover, including screw details.
Steps to remove the BC1 board and its connectors.
Instructions for removing the H3E board, including clips.
Guide on accessing the TV's service menu using the remote.
Displays error codes and status information for troubleshooting.
Overall system block diagram illustrating component interconnections.
To Next Page