Help Guide
Glass Sound Speaker
LSPX-S2
Using 2 speakers to enjoy stereo sound via Wi-Fi network (Wireless Stereo)
By connecting 2 LSPX-S2 speakers to the network, you can enjoy a more expansive stereo sound.
You must have 2 LSPX-S2 speakers.
Preparing for the Wireless Stereo function
Confirm that pre-installed software of the speakers is the latest version.
For details how to check the software version, see “Detecting the latest software while connected to a network.”
You can enjoy the Wireless Stereo function only on a network connection via Wi-Fi. This function is not available with
a BLUETOOTH connection. To use the BLUETOOTH connection, use the Speaker Add function.
For details on using the Speaker Add function, refer to “Using 2 speakers to enjoy wireless playback via
BLUETOOTH connection (Speaker Add function).”
Using 2 LSPX-S2 speakers (hereafter “speaker”) to enjoy stereo sound (Wireless Stereo function)
To cancel the Wireless Stereo function or use other functions
While using the Wireless Stereo function, other functions (such as the Wireless Multi-room function, Speaker Add
function, and BLUETOOTH connections) are not available.
Press the BLUETOOTH/
PAIRING button on either of the speakers.
The network indicator goes back to being lit up white, and the Wireless Stereo function is canceled. The group is also
canceled.
Hint
When connecting both speakers to the AC outlet using the USB AC adaptors, both speakers can be turned off by operating one
of the speakers (Power Interlock).
If the signal strength is weak due reasons, such as the speakers being far away from each other, the connection may be
canceled temporarily. Place the speakers in a position that provides enough signal strength.
When the connection is canceled temporarily, the speakers automatically reconnect. If it takes 10 minutes or more to reconnect
after canceling, the Wireless Stereo function is canceled. When using the Wireless Stereo function the next time, start from step
again.
Place the 2 speakers within 1 m (3.2 ft) of each other, and then turn on both of the speakers.
The
(on/standby) indicator lights up white.
1
Use Sony | Music Center to connect both speakers to a Wi-Fi network.
2
Use Sony | Music Center to do the settings for the Wireless Stereo function.
Do the settings for 1 of the 2 speakers that are connected to the Wi-Fi network. Operate the speaker by following
the on-screen instructions in Sony | Music Center.
The network indicator flashes in orange.
3
To Next Page
Loading...
