Regardless if the settings for [Auto Update] are enabled or disabled, if the speaker detects a software update, the (on/standby)
indicator flashes in orange 2 times immediately after the speaker is turned on.
Note
Updating normally takes about 3 to 10 minutes. It may take longer depending on your network environment.
Do not operate the speaker during an update. While updating, keep the speaker connected to a network and connected to an AC
outlet by using the USB AC adaptor. An update cannot be performed when the speaker is powered by the built-in rechargeable
battery only.
You must not interrupt the update.
4-748-325-11(1) Copyright 2019 Sony Corporation
To Next Page
