Sony LT11 Series - Note to users; General precautions; Handling instructions

42
English
1-1. General precautions
When using Sony Manufacturing Systems Corporation
products, observe the following general precautions along
with those given specifically in this manual to ensure proper
use of the products.
• Before and during operations, be sure to check that our
products function properly.
• Provide adequate safety measures to prevent damage in
case our products should develop a malfunction.
• Use outside indicated specifications or purposes and
modification of our products will void any warranty of the
functions and performance as specified for our products.
• When using our products in combination with other
equipment, the functions and performance as noted in
this manual may not be attained, depending upon the
operating environmental conditions. Make a thorough
study of the compatibility in advance.
1. Note to users
1-2. Handling instructions
• Do not open the cover of this device or put your hand
inside. Otherwise the internal circuit may be broken by
static electricity.
• To prevent malfunctions caused by static electricity,
always turn off the power when touching other parts than
the key switches.
• Do not route the connecting cable through the same duct
as the machine power line.
• When using an AC adapter, use a 9 V/600 mA or higher
AC power adapter.
Recommended adapter : Sony AC-E90HG
Note
Under no circumstances is this product to be used with
adapters other than those using the standard polarized
DC plug.
Take power from the lamp-light line.