Sony MDS-B5 - Page 93

Appendix
Appendix A-21
DATA: None
REQUEST command: None
CUE POINT STATUS RETURN
Command: 07EH
Function : Outputs for the cue point detection.
DATA: None
REQUEST command: None
INFORMATION RETURN
Command: 08FH
Function : Returns information for the
“INFORMATION REQUEST”: 00FH.
DATA: 2
DATA1: DEVICE TYPE
022H: Deck for recording/playing (MDS-B5)
023H: Deck for playing only (MDS-B6P)
DATA2: SOFTWARE VERSION (2 DIGIT
BCD)
REQUEST command: 00FH
TRACK No. LOCATE POINT
RETURN
Command: 0A3H
Function : Returns information for the “TRACK No.
LOCATE POINT PRESET”: 023H. This
information is returned even in the PLAY or
PAUSE mode.
DATA: 2
DATA1 (10, 1) {*001 to 255, decimal number}
DATA2 (**, 100)
REQUEST command: 023H
PGM TRACK No. RETURN
Command: 0A4H
Function : Returns information for the “PGM TRACK
No. PRESET”: 024H.
DATA: 4
DATA1 (10, 1)
DATA2 (**, 100) track No. (001 to 255)
DATA3 (10, 1) track order (STEP) (01 to 25)
DATA4 (10, 1) program area (00 to 39)
REQUEST command: 024H
MULTI ACCESS PRESET
RETURN
Command: 0A5H
Function : Returns information for the “MULTI
ACCESS PRESET”: 025H.
DATA: 3
DATA1 (10, 1)
DATA2 (**, 100) track No. (001 to 255)
DATA3 (10, 1) slot No. (1-10)
REQUEST command: 025H
NEXT AMS RETURN
Command: 0A6H
Function : Returns information for the “NEXT AMS
SET”: 026H.
DATA: 3
DATA1 (10, 1)
DATA2 (**, 100) Track No. (001 to 255)
DATA3: 000H: NEXT AMS OFF
001H: NEXT AMS ON
REQUEST command: 026H
Note
DATA1 and DATA2 is undefined when the
NEXT AMS is turned off.
PGM MODE RETURN
Command: 0ACH
Function : Returns information for the “PGM MODE
SET”: 02CH.
DATA: 2
000H: PGM MODE OFF
001H: PGM MODE ON
REQUEST command: 02CH
MULTI ACCESS SLOT RETURN
Command: 0ADH
Function : Returns information for the “MULTI
ACCESS SET”: 02DH.
DATA: 1
DATA1: (10, 1): the slot currently played back
REQUEST command: 02DH